|
Post by polliard on Oct 10, 2013 15:27:00 GMT -5
All,
I could use some help. I have two EMON DMON 3000 Series Units that are connected with the RS-485 blocks. They are daisy chained and terminate at a Web-Mon.
I log into the web-mon and attempt to discover and no devices are discovered. The web-mon shows the port enabled and in a {ok} status. The beat light is orange and blinking slowly. The EMON 3000 Units also have a beat light and they are blinking slowly but red.
Any help with getting these discovered and connected would be great!
Thanks,
Thomas Polliard
|
|