|
|
Post by emoncustomer on Jun 19, 2008 12:01:35 GMT -5
With E-Mon D-Mon meters, can I monitor more than one load with one meter?
|
|
|
|
Post by Suzy Abbott on Jun 19, 2008 12:50:11 GMT -5
Absolutely! E-Mon meters are supplied with split-core current sensors that allow for extremely flexible installations. There are two ways to monitor multiple loads with one meter.
A. Parallel current sensors. Install up to (3) sets of current sensors on one meter to provide a cumulative reading of the monitored loads. This is ideal when multiple panels need to be monitored together.
B. Grouped load wires. Loads can be grouped together and run through one set of current sensors for a cumulative reading. This is ideal when there are certain circuits within a panel that need to be monitored together.
For additional details contact E-Mon at (800) 334-3666.
NOTE: ALL LOADS MUST BE FROM SAME VOLTAGE SOURCE (TRANSFORMER). ALL PHASING MUST CORRESPOND FOR ALL MONITORED LOADS.
|
|
